|
Web
Education
Knee Joint Modeling using Laser Scanner Technique by GRD ...
Prof. Vijay Parmar, Vadodara Institute of Engineering, Kotambi; Prof. Unnati Parmar ,ITM Vocational university, Waghodia. "Knee Joint Modeling using Laser Scanner Technique." Global Research and ...
Roles of the screw types, proximity and anterior band ...
A finite element (FE) model containing a fractured patella fixed with various types of cannulated screws and anterior wiring was created in this study. Three types of screws, namely partial thread, full thread, and headless compression screws, and two screw depths, namely 5 and 10 mm away from the anterior surface of the patella, were included.
tag :: steel analysis | BibSonomy
1 Comparative Study on Construction Sequence Analysis on Steel Structure without and with Floating Columns Comparative Study on Construction Sequence Analysis on ...
Design of a Free-Floating Polycarbonate-Urethane Meniscal ...
We present a computational-experimental approach for the design optimization of a free-floating polycarbonate-urethane (PCU) meniscal implant. Validated 3D finite element (FE) models of the knee and PCU-based implant were analyzed under physiological loads.
Biomimetic Composite-Metal Hip Resurfacing Implant
Hip resurfacing technique is a conservative arthroplasty used in the young patient in which the femoral head is reshaped to accept metal cap with small guide stem. In the present investigation, a hybrid composite-metal resurfacing implant is proposed. The cup is made of carbon fiber/polyamide 12 (CF/PA12) covered with a thin layer of cobalt chrome (Co-Cr).
Roles of the screw types, proximity and anterior band ...
of transverse patellar fractures: a finite element investigation Chih-Hsien Chen1,2†, Yen-Nien Chen1,3†, Chun-Ting Li4, Chih-Wei Chang1,5,6*, Chih-Han Chang1 and Yao-Te Peng1,7 Abstract Background: Cannulated screws with an anterior wire are currently used for managing transverse patellar fracture.
Finite Element Investigation of Hybrid and Conventional ...
Finite Element Investigation of Hybrid and Conventional Knee Implants . By Habiba Bougherara, Ziauddin Mahboob, Milan Miric and Mohamad Youssef. Abstract. Total Knee arthroplasty (TKA) procedures relieve arthritic pain and restore jointfunction by replacing the contact surfaces of the knee joint. ... implant is expected to alleviate stress ...
Finite element modeling of a generic stemless hip implant ...
In this study, the finite element modeling and comparison of the stress and strain analyses were carried out for three different structures that are intact bone, stemless implant and stemmed one. Currently proposed stemless design studied here is the generic concept of stemless implant.
Recent Advances in Computational Mechanics of the Human ...
Among the computational approaches, the Finite Element Method (FEM) has been widely used to investigate the biomechanics of the knee joint at the cell, tissue, and joint levels. The earliest application of FEM in biomechanics goes back to 1972 [ 3 ], only over a decade after FEM was introduced as a powerful tool in structural analysis.
Application of finite element analysis in implant ...
EP Holmgren, RJ Seckinger, LM Kilgren, F ManteEvaluating parameters of osseointegrated dental implants using finite element analysis—a two-dimensional comparative study examining the effects of implant diameter, implant shape, and load direction
|
